Teknologisk videncenter - User contributions [en]

Cluster der kan alt/DHCP server

2012-11-17T12:11:40Z

Demyl: /* Konfigurer dhcpd.conf */

== Installation af DHCP-server ==

Følgende skal skrives for at installer DHCP-server

<source lang=cli>
sudo apt-get install dhcp3-server
</source>

=== Konfigurer dhcpd.conf ===
Nedenstående linjer skal tilføjes til dhcpd.conf - nano /etc/dhcp/dhcpd.conf.'''Udkommenter alt andet!'''

{|-
| valign="top" |
<source lang=cli>

ddns-update-style none;
authoritative;

option domain-name "dka.local";
option domain-name-servers 10.0.0.1;

default-lease-time 3100; # 51 minutes.
max-lease-time 604800; # 1 week

subnet 10.0.0.0 netmask 255.255.255.0 {
option routers 10.0.0.1;
option subnet-mask 255.255.255.0;
option broadcast-address 10.0.0.255;
next-server 10.0.0.1;
filename "pxelinux.0";

# The latest input from layer-9 required us to shift the dynamic
# range from the top half of the subnet down to the bottom half.
# This pool clause will elicit NAKs for the old leases while the
# clients migrate. Remember to remove this once they've all booted
# once or expired.
pool {
range 10.0.0.1 10.0.0.20;
deny all clients;
}
pool {
range 10.0.0.21 10.0.0.254;
}

host node1 {
hardware ethernet 20:cf:30:f1:0b:4d;
server-name "node1.dka.local";
fixed-address 10.0.0.10;
}

host node2 {
hardware ethernet 20:cf:30:f0:c6:55;
server-name "node2.dka.local";
fixed-address 10.0.0.11;
}

host node3 {
hardware ethernet 20:cf:30:f1:0b:4f;
server-name "node3.dka.local";
fixed-address 10.0.0.12;
}

host node4 {
hardware ethernet 20:cf:30:f0:c8:6d;
server-name "node4.dka.local";
fixed-address 10.0.0.13;
}

}

</source>
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/DHCP server

2012-11-17T12:11:01Z

Demyl: /* Installation af DHCP-server */

== Installation af DHCP-server ==

Følgende skal skrives for at installer DHCP-server

<source lang=cli>
sudo apt-get install dhcp3-server
</source>

=== Konfigurer dhcpd.conf ===
Nedenstående linjer skal tilføjes til dhcpd.conf - nano /etc/dhcp/dhcpd.conf.
Udkommenter alt andet!

{|-
| valign="top" |
<source lang=cli>

ddns-update-style none;
authoritative;

option domain-name "dka.local";
option domain-name-servers 10.0.0.1;

default-lease-time 3100; # 51 minutes.
max-lease-time 604800; # 1 week

subnet 10.0.0.0 netmask 255.255.255.0 {
option routers 10.0.0.1;
option subnet-mask 255.255.255.0;
option broadcast-address 10.0.0.255;
next-server 10.0.0.1;
filename "pxelinux.0";

# The latest input from layer-9 required us to shift the dynamic
# range from the top half of the subnet down to the bottom half.
# This pool clause will elicit NAKs for the old leases while the
# clients migrate. Remember to remove this once they've all booted
# once or expired.
pool {
range 10.0.0.1 10.0.0.20;
deny all clients;
}
pool {
range 10.0.0.21 10.0.0.254;
}

host node1 {
hardware ethernet 20:cf:30:f1:0b:4d;
server-name "node1.dka.local";
fixed-address 10.0.0.10;
}

host node2 {
hardware ethernet 20:cf:30:f0:c6:55;
server-name "node2.dka.local";
fixed-address 10.0.0.11;
}

host node3 {
hardware ethernet 20:cf:30:f1:0b:4f;
server-name "node3.dka.local";
fixed-address 10.0.0.12;
}

host node4 {
hardware ethernet 20:cf:30:f0:c8:6d;
server-name "node4.dka.local";
fixed-address 10.0.0.13;
}

}

</source>
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T12:04:35Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

Editer /etc/exports
:tilføj 1 linie i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

Exporter de nye shares:
<source lang=cli>
exportfs
</source>

Genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klienterne skal de have det samme domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T12:03:12Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

Editer /etc/exports
:tilføj 1 linie i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

Exporter de nye shares:
<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T12:02:49Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

#Editer /etc/exports
:tilføj 1 linie i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

##Exporter de nye shares:
<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T12:01:08Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

Editer /etc/exports
:tilføj 1 linie i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

#Exporter de nye shares:
#<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T11:57:27Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

#Editer /etc/exports
:tilføj 1 linie i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

#Exporter de nye shares:
<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T11:56:48Z

Demyl: /* Exports */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

Editer /etc/exports
tilføj 1 linie i bunden

#<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

Exporter de nye shares:
##<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-17T11:55:41Z

Demyl:

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

==Exports==

Editer /etc/exports
tilføj 1 linie i bunden

#<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

Exporter de nye shares:
#<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:53:00Z

Demyl: /* System-config-kickstart */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Kør Kommando'en nedenfor for at starte med at lave din kickstart fil.

<source lang=cli>
system-config-kickstart
</source>
:#så får du et grafisk window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:47:10Z

Demyl: /* System-config-kickstart */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre

<source lang=cli>
system-config-kickstart
</source>
:#så får du et grafisk window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:44:21Z

Demyl: /* System-config-kickstart */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre

<source lang=cli>
system-config-kickstart
</source>
:#så får du et window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:44:01Z

Demyl: /* System-config-kickstart */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre

<source lang=cli>
system-config-kickstart
</source>
''':#'''så får du et window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:43:38Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre

<source lang=cli>
system-config-kickstart
</source>
:#så får du et window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:43:08Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre

<source lang=cli>
system-config-kickstart
</source>
#så får du et window pop up til opsætning af en kickstart fil

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:41:50Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

==System-config-kickstart==

Nu kan vi køre - så får du et window pop up til opsætning af en kickstart fil

<source lang=cli>
system-config-kickstart
</source>

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:31:53Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|350px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:26:35Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|400px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:26:14Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|400px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:26:03Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|500px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:25:50Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|300px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:25:40Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|150px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:25:24Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|px150]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:25:13Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|px300]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:24:54Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|px 300]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T11:24:19Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|center]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:52:00Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:51:40Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|left]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:51:27Z

Demyl: /* Putty Opsætning */

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|left|150px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>

==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:50:41Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==
[[File:Putty-Xming-setup.png|left|thumb|150px]]

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>
==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:49:02Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link:
http://sourceforge.net/projects/xming/

==Putty Opsætning==

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>
==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

File:Putty-Xming-setup.png

2012-11-17T10:45:28Z

Demyl: uploaded a new version of "File:Putty-Xming-setup.png"

File:Putty-Xming-setup.png

2012-11-17T10:43:28Z

Demyl:

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:31:06Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

For at bruge '''system-config-kickstart''' skal du installere det med kommando'en
<source lang=cli>
sudo apt-get install system-config-kickstart
</source>

For at du kan bruge '''sytem-config-kickstart''' skal du have installeret Xming på din windows pc. Du kan hente Xming på dette link
<source lang=cli>
http://sourceforge.net/projects/xming/
</source>

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>
==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/Kickstart fil til installation af noder

2012-11-17T10:06:59Z

Demyl:

*Der skal anvendes en http: server således at noderne kan hente kickstart filen. Anvend for ekempel '''lighttpd'''
<source lang=cli>
sudo apt-get install lighttpd
</source>
*For at lave kickstart filer kan i ''håndlave'' dem i en editor eller anvende '''system-config-kickstart'''

'''Filenplacering'''
<source lang=cli>
/var/www/ks.cfg
</source>
==Kickstart fil==
<source lang=cli>
#Generated by Kickstart Configurator
#platform=x86

#System language
lang da_DK
#Language modules to install
langsupport da_DK
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#Root password
rootpw --iscrypted $1$AkUb1qdI$vMYeX3C37RX0pRjBppX7W.
#Initial user
user cluster --fullname "cluster admin" --iscrypted --password $1$9Za4QvWX$AXgp$
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://10.0.0.1:3142/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
</source>

Sådan ser vores gældende Kickstart fil ud
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/mpi

2012-11-17T10:02:13Z

Demyl:

brug komandoen
<source lang=cli>
sudo apt-get install libopenmpi-dev openmpi-bin openmpi-doc
</source>

for at installere mpi på alle vores noder på en gang kan du bruge denne kommando. (Installation sker kun på de maskiner som er defineret i /etc/dsh/machines.list)
<source lang=cli>
dsh -f /etc/dsh/machines.list "sudo apt-get -y install libopenmpi-dev openmpi-bin openmpi-doc"
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/mpi

2012-11-17T10:00:46Z

Demyl:

brug komandoen
<source lang=cli>
sudo apt-get install libopenmpi-dev openmpi-bin openmpi-doc
</source>

for at installere mpi på vores noder på en gang kan du bruge denne kommando.
<source lang=cli>
dsh -f /etc/dsh/machines.list "sudo apt-get -y install libopenmpi-dev openmpi-bin openmpi-doc"
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/mpi

2012-11-17T09:57:04Z

Demyl:

brug komandoen
<source lang=cli>
sudo apt-get install libopenmpi-dev openmpi-bin openmpi-doc
</source>

<source lang=cli>
dsh -f /etc/dsh/machines.list "sudo apt-get -y install libopenmpi-dev openmpi-bin openmpi-doc"
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/mpi

2012-11-17T09:56:12Z

Demyl:

Cluster der kan alt/mpi

2012-11-17T09:52:36Z

Demyl:

brug komandoen
<source lang=cli>
sudo apt-get install libopenmpi-dev openmpi-bin openmpi-doc
</source>

For at installere på alle noder skal der bruges komandoen:
<source lang=cli>
dsh -f /etc/dsh/machines.list "sudo apt-get -y install libopenmpi-dev openmpi-bin openmpi-doc"
</souce>

{{Source cli}}

Cluster der kan alt/mpi

2012-11-17T09:52:04Z

Demyl:

Cluster der kan alt/mpi

2012-11-17T09:50:54Z

Demyl:

brug komandoen
<source lang=cli>
apt-get install libopenmpi-dev openmpi-bin openmpi-doc som SUDO
</source>

For at installere på alle noder skal der bruges komandoen: dsh -f /etc/dsh/machines.list "sudo apt-get -y install libopenmpi-dev openmpi-bin openmpi-doc"

Cluster der kan alt/Tilføjelse af ny klient

2012-11-17T09:29:35Z

Demyl:

Ubuntu 12.04

Step 1. Når du vil tilføje en ny klient kan du starte med at lave en lille tilføjelse i DHCP. <br>
Step 2. Husk at lav en ”Sudo bash” ellers har du ikke rettigheder til følgende.
Path: cd /etc/dhcp <Tryk ENTER tasten> brug derefter Nano på filen dhcpd.conf
* I bunden af filen dhcpd.conf tilføjes tre linjer for hver node(client),

*I første linje tilføjes ”hostname”

* I anden linje tilføjes klientens MAC –adresse

* I tredje linje skriver du den ip, som du ønsker den valgte klient skal have.

Her er et eksempel på hvordan de tre linjer skal skrives ind på klienten ”Node1”.

</source>
Host node 1 {
hardware ethernet 00:0c:29:25:41:81;
server-name "node1.supercluster.local";
fixed-address 10.0.0.10;
}
<source lang=cli>

Den sidste ting du skal gøre inden at din klient kan pxe boot, er ved at lave en nano på filen
”rev.0.0.10.in-addr.dka.local.” hvor ligger denne fil så?
Path: cd /etc/bind/zones/ <Tryk ENTER tasten> brug derefter Nano på filen rev.0.0.10.in-addr.arpa
Den linje du skal tilføje ser således ud:
10 IN PTR node1.dka.local

Når disse tilføjelser er gjort, skal du genstarte 2 services.

Nu kan du starte din klient i ”vmware vsphere client” og trykke på F12 for at få den til at kigge efter din PXE-server.
IT WORKS!½

Cluster der kan alt/LDAP eller NIS

2012-11-17T09:26:59Z

Demyl: /* Installation af master server */

=Installation af master server=

Tilføj følgende linje til '''/etc/hosts.allow'''.
<source lang=cli>
portmap ypserv ypbind: 10.0.0.0/255.255.255.0
</source>
Installer NIS. Du vil blive bedt om at indtaste domænenavnet. Domænenavnet er ikke DNS-domænenavn - men et unikt navn for klyngen af maskiner deler de samme oplysninger.
<source lang=cli>
apt-get install portmap nis
</source>
*Ret '''/etc/default/nis''' (nano /etc/default/nis) og set NISSERVER linjen til
<source lang=cli>
NISSERVER =master
</source>
*Ret '''/etc/yp.conf''' og tilføj en linje med:
<source lang=cli>
domain dka.local server 127.0.0.1
</source>
*Ret '''/etc/ypserv.securenets''' fjern '''0.0.0.0''' linjen - insecure - og tilføj dit eget net(255.255.255.0 10.0.0.0).
*genstart så yellowpages servicen for at loade det nye configuration.
<source lang=cli>
service ypserv restart
</source>
==Adding a user==
Efter du har oprettet en ny bruger, '''adduser''' er det nødvendigt at genopbygge nis maps!
<source lang=cli>
root@head:~# <input>make -C /var/yp</input>
make: Går til katalog '/var/yp'
make[1]: Går til katalog '/var/yp/c1.local'
Updating passwd.byname...
Updating passwd.byuid...
Updating netid.byname...
Updating shadow.byname...
make[1]: Forlader katalog '/var/yp/c1.local'
make: Forlader katalog '/var/yp'
</source>
===Script adding user in a Cluster===
The following simple script:
*Add a user on the NIS server.
*Add a ssh key to the users '''/home''' library.
**In this cluster '''/home''' is distributed with [[NFS]] to all nodes. Logon to nodes without entering password
*Rebuilding the NIS database with the new user
<source lang=cli>
#!/bin/bash
echo -e "Adding user to cluster"
echo -e "======================\n"
echo -en "User login name: "
read NAME
adduser $NAME

echo -e "Creating keys"
su $NAME -c "ssh-keygen"
echo -e "Distributing keys"
su $NAME -c "cat /home/$NAME/.ssh/id_rsa.pub >> /home/$NAME/.ssh/authorized_keys"
echo -e "Rebuild NIS database"
make -C /var/yp
</source>

=Installation på klienten=
Installer software
<source lang=cli>
sudo apt-get install portmap nis
</source>
Kør disse kommandoer, hvor NIS_SERVER_IP = din nis server ip
<source lang=cli>
echo "portmap : <notice>NIS_SERVER_IP"</notice> >> /etc/hosts.allow
echo "+::::::" >> /etc/passwd
echo "+:::" >> /etc/group
echo "+::::::::" >> /etc/shadow
echo "Domain = Cluster" >> /etc/idmapd.conf
echo "ypserver <notice>NIS_SERVER_IP"</notice> >> /etc/yp.conf
service ypbind restart
service idmapd restart
</source>
Test med
<source lang=cli>
yptest
</source>
{{source cli}}

Cluster der kan alt/LDAP eller NIS

2012-11-17T09:23:25Z

Demyl: /* Installation af master server */

Cluster der kan alt/LDAP eller NIS

2012-11-17T09:20:04Z

Demyl: /* Installation af master server */

Cluster der kan alt/DNS Server

2012-11-17T09:06:57Z

Demyl: /* configure DNS (Bind) */

=Installation af DNS=

Instruktioner

==Installer DNS Server==

sudo apt-get install bind9

==configure DNS (Bind)==
Vi skal bruge 5 filer.

We will edit 3 files.
#/etc/bind/named.conf.local
#/etc/bind/named.conf.options
#/etc/resolvconf/resolv.conf.d/base

We will create 2 files.
#/etc/bind/zones/dka.local.db
#/etc/bind/zones/rev.0.0.10.in-addr.arpa

===First step: add domain zone – dka.local===

*sudo vi /etc/bind/named.conf.local
<source lang=cli>
# Our Domain zone
zone "dka.local." {
type master;
file "/etc/bind/zones/dka.local.db";
};

# For reverse DNS
zone "0.0.10.in-addr.arpa" {
type master;
file "/etc/bind/zones/rev.0.0.10.in-addr.arpa.db";
};

</source>

===Secund step: Add the DNS servers from your ISP===

# Sudo vi /etc/bind/named.conf.options

<source lang=cli>
forwarders {
172.16.4.66;
};

auth-nxdomain no; # conform to RFC1035
listen-on-v6 { any; };
listen-on { any; };

allow-query { 127.0.0.1; 172.16.4.66/24; 10.0.0.0/24;};
};

</source>

===Third step: Modify the resolv.conf file ===

$ Sudo vi /etc/resolve.conf - Version 12.04 skal man ændre nano /etc/resolvconf/resolv.conf.d/base

<source lang=cli>
nameserver 10.0.0.1
domain dka.local
search dka.local

</source>

===Fourth step: Define zones===

Sudo mkdir /etc/bind/zones
Sudo vi /etc/bind/zones/dka.local.db

<source lang=cli>

; BIND data file for local loopback interface
;
$TTL 604800
@ IN SOA ns.dka.local. root.dka.local. (
8 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800 ) ; Negative Cache TTL
;
@ IN NS ns.dka.local.
ns IN A 10.0.0.1
ubuntu IN A 10.0.0.21

</source>

The TTL or time to live is set for 3 days
The ns.mydomain.com nameserver is defined
ubuntudesktop, pc and gateway are entered as an A record
An alias of www is assigned to ubuntudesktop using CNAME

===Step five: Create a “rev.0.0.10.in-addr.arpa” file for reverse lookup===

Sudo vi /tec/bind/zones/rev.0.0.10.in-addr.arpa

<source lang=cli>
$TTL 3D
@ IN SOA ns.dka.local. admin.dka.local. (
2007062001
28800
604800
604800
86400
)
IN NS ns.dka.local.
2 IN PTR ubuntu.dka.local

</source>

===Step seks: Test vores nye domæne og DNS entries===

Dig

<source lang=cli>
$ dig dka.local
</source>

Nslookup

<source lang=cli>
nslookup ns
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/DHCP server

2012-11-17T09:02:14Z

Demyl: /* Konfigurer dhcpd.conf */

== Installation af DHCP-server ==

Følgende skal skrives for at installer DHCP-server på LINUX

<source lang=cli>
sudo apt-get install dhcp3-server
</source>

=== Konfigurer dhcpd.conf ===
Nedenstående linjer skal tilføjes til dhcpd.conf - nano /etc/dhcp/dhcpd.conf.
Udkommenter alt andet!

{|-
| valign="top" |
<source lang=cli>

ddns-update-style none;
authoritative;

option domain-name "dka.local";
option domain-name-servers 10.0.0.1;

default-lease-time 3100; # 51 minutes.
max-lease-time 604800; # 1 week

subnet 10.0.0.0 netmask 255.255.255.0 {
option routers 10.0.0.1;
option subnet-mask 255.255.255.0;
option broadcast-address 10.0.0.255;
next-server 10.0.0.1;
filename "pxelinux.0";

# The latest input from layer-9 required us to shift the dynamic
# range from the top half of the subnet down to the bottom half.
# This pool clause will elicit NAKs for the old leases while the
# clients migrate. Remember to remove this once they've all booted
# once or expired.
pool {
range 10.0.0.1 10.0.0.20;
deny all clients;
}
pool {
range 10.0.0.21 10.0.0.254;
}

host node1 {
hardware ethernet 20:cf:30:f1:0b:4d;
server-name "node1.dka.local";
fixed-address 10.0.0.10;
}

host node2 {
hardware ethernet 20:cf:30:f0:c6:55;
server-name "node2.dka.local";
fixed-address 10.0.0.11;
}

host node3 {
hardware ethernet 20:cf:30:f1:0b:4f;
server-name "node3.dka.local";
fixed-address 10.0.0.12;
}

host node4 {
hardware ethernet 20:cf:30:f0:c8:6d;
server-name "node4.dka.local";
fixed-address 10.0.0.13;
}

}

</source>
{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]

Cluster der kan alt/NFS Server

2012-11-15T11:44:15Z

Demyl: /* NFS Clienter */

===NFS server===

Installer NFS Server
<source lang=cli>
apt-get install nfs-kernel-server
</source>

Editer /etc/exports
tilføj disse 2 linier i bunden

<source lang=cli>
/home/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
/script/ 10.0.0.0/24(rw,no_root_squash,no_subtree_check,async)
</source>

Exporter de nye shares:
<source lang=cli>
exportfs
</source>

Det burde ikke være nødvendig, men kan genstart NFS serveren med

<source lang=cli>
service nfs-kernel-server restart
</source>

*For at UID og GID bliver overført korrekt til klineterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
===NFS Clienter===
Installer NFS clienten
<source lang=cli>
apt-get install nfs-common
</source>
*For at UID og GID bliver overført korrekt til Klienterne skal de have det samme

IDMAPD domain i /etc/idmapd.conf
<source lang=cli>
Domain = Cluster
</source>
*genstart så idmapd servicen for at loade det nye configuration.
<source lang=cli>
service idmapd restart
</source>
Mount folderen på klienten
<source lang=cli>
mount 10.0.0.1:/home/ /home/
</source>

{{Source cli}}
[[Category:Cluster]][[Category:Ubuntu]]