Rael at 07:53, 12 November 2014

2014-11-12T07:53:39Z

Rael at 07:52, 12 November 2014

2014-11-12T07:52:39Z

Rael: Created page with "{{Source cli}}"

2014-11-12T07:07:20Z

Created page with "{{Source cli}}"

New page

@@ Line 58: / Line 58: @@
 ACC01#
 </source>
+There need to be a working trunk between the switches to syncronize VTP and it can take up to 5 mins.
 {{Source cli}}

← Older revision		Revision as of 07:52, 12 November 2014
Line 1:		Line 1:
		+	Configure the Distribution switches as the VTP Servers
		+	<source lang=cli>
		+	DLS1#<input>conf t</input>
		+	Enter configuration commands, one per line. End with CNTL/Z.
		+	DLS1(config)#<input>vtp mode server</input>
		+	Device mode already VTP SERVER.
		+	DLS1(config)#<input>vtp domain DB1</input>
		+	Changing VTP domain name from NULL to DB1
		+	DLS1(config)#<input>vtp password DB1</input>
		+	Setting device VLAN database password to DB1
		+	DLS1(config)#<input>end</input>
		+	DLS1#
		+	%SYS-5-CONFIG_I: Configured from console by console
		+
		+	DLS1#<input>show vtp status</input>
		+	VTP Version : 2
		+	Configuration Revision : 0
		+	Maximum VLANs supported locally : 1005
		+	Number of existing VLANs : 6
		+	<notice>VTP Operating Mode : Server
		+	VTP Domain Name : DB1</notice>
		+	VTP Pruning Mode : Disabled
		+	VTP V2 Mode : Disabled
		+	VTP Traps Generation : Disabled
		+	MD5 digest : 0xC9 0xA0 0x90 0x2C 0xBA 0xAB 0x1B 0xB5
		+	Configuration last modified by 0.0.0.0 at 3-1-93 00:05:15
		+	Local updater ID is 0.0.0.0 (no valid interface found)
		+	DLS1#show vtp pass
		+	DLS1#show vtp password
		+	<notice>VTP Password: DB1</notice>
		+	DLS1#
		+	</source>
		+	Configure the VTP Client
		+	<source lang=cli>
		+	ACC01(config)#<input>vtp mode client</input>
		+	Setting device to VTP CLIENT mode.
		+	ACC01(config)#<input>vtp domain DB1</input>
		+	Changing VTP domain name from NULL to DB1
		+	ACC01(config)#<input>vtp password DB1</input>
		+	Setting device VLAN database password to DB1
		+	ACC01(config)#<input>end</input>
		+	ACC01#
		+	%SYS-5-CONFIG_I: Configured from console by console
		+	<input>show vtp status</input>
		+	VTP Version : 2
		+	Configuration Revision : 0
		+	Maximum VLANs supported locally : 255
		+	Number of existing VLANs : 5
		+	<notice>VTP Operating Mode : Client
		+	VTP Domain Name : DB1</notice>
		+	VTP Pruning Mode : Disabled
		+	VTP V2 Mode : Disabled
		+	VTP Traps Generation : Disabled
		+	MD5 digest : 0xF1 0x86 0xA4 0xD9 0xC4 0xE1 0xBA 0x5F
		+	Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
		+	ACC01#<input>show vtp password</input>
		+	<notice>VTP Password: DB1</notice>
		+	ACC01#
		+	</source>
		+
	{{Source cli}}		{{Source cli}}

3-tier design/VTPServers - Revision history

Rael at 07:53, 12 November 2014

Rael at 07:52, 12 November 2014

Rael: Created page with "{{Source cli}}"