Wireless LAN Controller 4400 - Revision history

Rael: /* 4404 */

2015-04-11T10:22:10Z

‎4404

2015-04-11T10:00:22Z

‎IP konfiguration

2015-04-11T09:59:51Z

‎IP konfiguration

2015-04-11T09:59:33Z

2015-04-11T09:50:26Z

‎4404

2015-04-11T09:10:02Z

‎4404

2015-04-11T09:08:36Z

Created page with "=4404= *The default administrative username and password are admin and admin, respectively"

New page

=4404=
*The default administrative username and password are admin and admin, respectively

@@ Line 2: / Line 2: @@
 *The default administrative username and password are admin and admin, respectively
 *Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example|Eksempel]]
 ==IP konfiguration==
 Der skal sættes min 4 IP adresser på WLC'en<ref>http://www.cisco.com/c/en/us/td/docs/wireless/controller/4400/quick/guide/ctrlv32.html</ref>

@@ Line 3: / Line 3: @@
 *Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example|Eksempel]]
 ==IP konfiguration==
-Der skal sættes min 3 IP adresser på WLC'en<ref>http://www.cisco.com/c/en/us/td/docs/wireless/controller/4400/quick/guide/ctrlv32.html</ref>
+Der skal sættes min 4 IP adresser på WLC'en<ref>http://www.cisco.com/c/en/us/td/docs/wireless/controller/4400/quick/guide/ctrlv32.html</ref>
 ;Service IP:The service-port interface controls communications through the service port. Its IP address must be on a different subnet from the management and AP-manager interfaces. This configuration enables you to manage the controller directly or through a dedicated management network to ensure service access during network downtime.
 ;Management IP:The management interface is the default interface for in-band management of the controller and connectivity to enterprise services such as AAA servers.
 ;AP Manager:The AP-manager interface is used for Layer 3 communications between the controller and lightweight access points. It must have a unique IP address and is usually configured on the same VLAN or IP subnet as the management interface, but this is not a requirement.

@@ Line 3: / Line 3: @@
 *Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example|Eksempel]]
 ==IP konfiguration==
-Der skal sættes min 3 IP adresser på WLC'en
+Der skal sættes min 3 IP adresser på WLC'en<ref>http://www.cisco.com/c/en/us/td/docs/wireless/controller/4400/quick/guide/ctrlv32.html</ref>
 ;Service IP:The service-port interface controls communications through the service port. Its IP address must be on a different subnet from the management and AP-manager interfaces. This configuration enables you to manage the controller directly or through a dedicated management network to ensure service access during network downtime.
 ;Management IP:The management interface is the default interface for in-band management of the controller and connectivity to enterprise services such as AAA servers.
 ;AP Manager:The AP-manager interface is used for Layer 3 communications between the controller and lightweight access points. It must have a unique IP address and is usually configured on the same VLAN or IP subnet as the management interface, but this is not a requirement.

← Older revision		Revision as of 09:59, 11 April 2015
Line 2:		Line 2:
	*The default administrative username and password are admin and admin, respectively		*The default administrative username and password are admin and admin, respectively
	*Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example\|Eksempel]]		*Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example\|Eksempel]]
		+	==IP konfiguration==
		+	Der skal sættes min 3 IP adresser på WLC'en
		+	;Service IP:The service-port interface controls communications through the service port. Its IP address must be on a different subnet from the management and AP-manager interfaces. This configuration enables you to manage the controller directly or through a dedicated management network to ensure service access during network downtime.
		+	;Management IP:The management interface is the default interface for in-band management of the controller and connectivity to enterprise services such as AAA servers.
		+	;AP Manager:The AP-manager interface is used for Layer 3 communications between the controller and lightweight access points. It must have a unique IP address and is usually configured on the same VLAN or IP subnet as the management interface, but this is not a requirement.

@@ Line 1: / Line 1: @@
 =4404=
 *The default administrative username and password are admin and admin, respectively
-*Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide]
+*Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide] & [[/Recovery Example|Eksempel]]

← Older revision		Revision as of 09:10, 11 April 2015
Line 1:		Line 1:
	=4404=		=4404=
	*The default administrative username and password are admin and admin, respectively		*The default administrative username and password are admin and admin, respectively
		+	*Password recovery [https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller Guide]