Difference between revisions of "Wireguard ubuntu"
From Teknologisk videncenter
m (→Host A: Public access) |
m (→Host A: Public access) |
||
| Line 13: | Line 13: | ||
touch wg0.conf | touch wg0.conf | ||
wg-quick save wg0 | wg-quick save wg0 | ||
| + | systemctl enable wg-quick@wg0.service | ||
| + | systemctl start wg-quick@wg0 | ||
| + | |||
</source> | </source> | ||
/etc/wireguard/wg. conf | /etc/wireguard/wg. conf | ||
Revision as of 13:47, 25 June 2025
Wireguard VPN between two Ubuntu hosts - one behind NAT
Host A: Public access
sudo bash
apt install wireguard
cd /etc/wireguard
umask 077
wg genkey > privatekey
wg pubkey < privatekey > publickey
ip link add dev wg0 type wireguard
ip address add dev wg0 172.31.0.1/24
wg set wg0 listen-port 8172 private-key privatekey peer OTHER HOST PUBLIC KEY allowed-ips 0.0.0.0/0 endpoint 91.172.64.81:51820
touch wg0.conf
wg-quick save wg0
systemctl enable wg-quick@wg0.service
systemctl start wg-quick@wg0
/etc/wireguard/wg. conf
[Interface]
Address = 172.31.0.1/24 # wg0 interface IP (Tunnel endpoint)
ListenPort = 8172
PrivateKey = THIS HOSTS PRIVATE KEY (Host A)=
# VVS nuc
[Peer]
PublicKey = THE OTHER HOSTS PUBLIC KEY (host B)=
AllowedIPs = 192.168.11.0/24, 172.31.0.0/24
Endpoint = 91.172.64.81:51820
Host B: Behind NAT
/etc/wireguard/wg0.conf
[Interface]
Address = 172.31.0.2/24
ListenPort = 51820
PrivateKey = THIS HOSTS PRIVATE KEY (Host B)=
[Peer]
PublicKey = OTHER HOSTS PUBLIC KEY (Host A)=
AllowedIPs = 192.168.12.0/24, 172.31.0.0/24
Endpoint = 91.172.64.81:8172
PersistentKeepalive = 20