Difference between revisions of "Routing protocols"
From Teknologisk videncenter
m (→OSPF higlights) |
m |
||
| Line 9: | Line 9: | ||
|- | |- | ||
|} | |} | ||
| − | =OSPF | + | =OSPF highlights= |
{|border=1 ;style="margin: 0 auto; text-align: center;cellpadding="5" cellspacing="0" | {|border=1 ;style="margin: 0 auto; text-align: center;cellpadding="5" cellspacing="0" | ||
|+ OSPF Highlights | |+ OSPF Highlights | ||
| Line 28: | Line 28: | ||
|- | |- | ||
| Priority 2: Next higest Router-ID | | Priority 2: Next higest Router-ID | ||
| + | |- | ||
| + | | rowspan=3|Metric || Uses bandwidth called cost - Default calculated as 10<sup>8</sup> / bandwidth | ||
| + | |- | ||
| + | | Metric is the accumulated cost to the destination network | ||
| + | |- | ||
| + | |default highest bandwidth is 10<sup>8</sup> = 100 Mbps. Change with the '''auto-cost reference-bandwidth''' command. Remember to change on all routers. | ||
|- | |- | ||
|} | |} | ||
Revision as of 09:31, 25 April 2013
| Parameter | OSPF | EIGRP |
|---|---|---|
| Type | Link State | Distance vector |
| Metric | Bandwidth | Bandwidth + delay |
OSPF highlights
| Term | Explanation |
|---|---|
| Router-ID | Priority 1: Set with the router-id command |
| Priority 2: Highest loopback IP address | |
| Priority 3: Highest active interface IP address | |
| DR Designated Router | Priority 1: Highest priority. Set with the ip ospf priority command on the interface |
| Priority 2: Higest Router-ID | |
| BDR Backup Designated Router | Priority 1: Next highest priority. Set with the ip ospf priority command on the interface |
| Priority 2: Next higest Router-ID | |
| Metric | Uses bandwidth called cost - Default calculated as 108 / bandwidth |
| Metric is the accumulated cost to the destination network | |
| default highest bandwidth is 108 = 100 Mbps. Change with the auto-cost reference-bandwidth command. Remember to change on all routers. |